Influences of the tempering temperature on the microstructure, mechanical property and wear resistance of High-Boron High Speed Steel （HBHSS） roll materials were investigated by means of optical microscopy, scanning electron microscopy （SEM）, X-ray diffraction, hardness measurement, impact tester, tensile tester and pin abrasion tester. The results show that the as-cast structure of HBHSS consists of a great amount of martensite and M2（B,C） and a few retained austenites and M23（B,C）6. After solution treated at 1,050℃ and followed by oil cooling, the amount of M23（B,C）6 carbo-borides in quenched HBHSS increases obviously and the macrohardness of the quenched HBHSS is 66 HRC, which is very close to the 65.8 HRC of as-cast HBHSS. On the whole, the hardness of HBHSS alloy shows a trend of slight decrease with increasing tempering temperature when tempered below 500 ℃. While when above 500 ℃, the hardness increases slightly as the tempering temperature increases and reaches a peak at 525 ℃ and then decreases obviously. The impact toughness of HBHSS has a tendency to increase as the tempering temperature increases. Tempering can improve the tensile strength and elongation of HBHSS, but a higher tempering temperature causes a slight decrease in both tensile strength and elongation. Excellent wear resistance can be obtained by tempering at 500 to 550 ℃.
Fu HanguangDu ZhongzeLi PingJiang YehuaZhou RongCen QihongHou JianqiangLei YongpingGuo Hongxing
